Titlebook: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD; Volume 2 U. Chandrasekhar,Lung-Jieh Y

Defiance

Dry Machining of Nimonic 263 Alloy Using PVD and CVD Inserts,based on Taguchi’s L16 orthogonal array are carried out. From the experimental results, the cutting force could not be improved, although a remarkable reduction in roughness and tool wear is observed for the AilTiN PVD coated insert under different cutting condition compared to TiN/Al.O./TiCN.

synovial-joint

Experimental Study on Micro-deburring of Micro-grooves by Micro-EDM,r surface quality and less top burrs. Micro-EDM is employed to remove the top burrs. Different energy levels were employed in a capacitance-based micro-EDM. It is found that the lesser the energy level better the deburred surface. High energy levels tend to damage the quality of the micro-channels.

吞噬

STENT

荒唐

Investigation of Parameters for Machining a Difficult-to-Machine Superalloy: Inconel X-750 and Waspon, and the coating material was AlTiN. The cutting forces and surface roughness were measured post the tool wore out. The microstructures and Vickers’ hardness of the superalloys were also studied. Finally, the range of cutting conditions is recommended for machining this alloy in an industrial environment.

Musculoskeletal

2195-4356 s for the aerospace and auto industry.Offers a valuable refeThis book gathers the best articles presented by researchers and industrial experts at the International Conference on “Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)”. The papers discuss ne

Innovative

Modeling and Optimization of SIS Process Using Evolutionary Computational Approach, mathematical models by considering various SIS process parameters. The developed regression models are further optimized by an evolutionary approach of genetic algorithm (GA) scheme. The proposed approach can be effectively utilized to predict the dimensional accuracy under various process conditions.

違法事實

Improving Process Performance with World-Class Manufacturing Technique: A Case in Tea Packaging Ind analysis, 5W?+?1H analysis, brainstorming, why-why analysis. After implementation of this methodology, a better control over the process has been obtained. Detailed analysis of root cause results into the permanent solution to the problem which reduces defects and improves profit of the company.

jumble

Study on Carbon, Glass, and Flax Hybrid Composites Using Experimental and Computational Techniques, carbon, glass, and flax using epoxy resin. The mechanical properties of these laminates were studied experimentally using tensile tests and three-point bending tests. The results from experimental tests are validated computationally using Ansys 16 software.

Immunoglobulin