Titlebook: Recent Trends in Mechanical Engineering; Select Proceedings o Ambrish Maurya,Anmesh Kumar Srivastava,Shailesh Ma Conference proceedings 202

隱士

Stricture

CFD Analysis of Particle Shape and Size on Impact Velocity and Effect of Stand-off Distance in the sent work, the effect of shape and size of feedstock powder particles is analyzed upon impact velocity of cold spray (CS) coating via CFD analysis. The geometry for the work has been drawn by SolidWorks, and the analysis has been carried out through fluent. The analysis has been carried out with the

使激動(dòng)

Experimental Investigation of Evaporator Coil Performance with Ethylene Glycol,. Energy consumption reduction in cooling system is always a challenging task. An experimental setup is fabricated to study the heat transfer rate of an evaporator coil. Ethylene glycol is a secondary refrigerant and considered as a working fluid. The influence of the cooling liquid inlet temperatur

發(fā)怨言

Energy and Exergy Analysis of Combined Ejector Refrigeration Cycle Using Eco-Friendly Refrigerants, waste heat has been presented, using working fluids R141b, R152a, R600a and R717. The results of the study demonstrate that as evaporator temperature increases, COP increases and exergy efficiency decreases, though both continuously increases and decreases with ejector inlet pressure, condensing pr

枯燥

Emission Characteristics of Split Injection System in Low-Temperature Combustion Diesel Engine: A Rment policies. Researchers and engineers from automobile communities have been working on the advanced design and development of a diesel engine to meet these mandatory emission regulations. The split injection among these new developments has proven to be the key to reduce soot and NOx emissions in

conference

Selection of Suitable Material for the Solar Panel Using SWARA and COPRAS Method,on demands minimal use of fossil fuel and maximum use of renewable energy including sunlight, wind, tides, biomass, hydropower, etc. The use of renewable energy resources also helps in overall sustainable development. This research work uses a hybrid approach of multiple-criteria decision making (MC

SNEER

叢林

PON

睨視

Thermodynamic Analysis of an Integrated OTEC-Based Multi-Generation Plant for Hydrogen and Freshwaty for hydrogen and desalinated water production. The proposed novel plant consists of Ocean Thermal Energy Conversion (OTEC) unit coupled with a solar boosted Multi-Effect Distillation (MED-TVC) unit. The temperature difference of the seawater pumped from both surface and depth of the oceans is util