Titlebook: Recent Advances in Mechanical Infrastructure; Proceedings of ICRAM Ajit Kumar Parwani,PL. Ramkumar,Saurabh Kumar Yada Conference proceeding

奇思怪想

Reduction of Scrap and Rework Cost by Implementing 5S Methodology: A Case Studyuses on the?reduction of scrap and rework cost, along with solving the operations and management-related problems in an enterprise. Based on the 5S methodology, a special-purpose machine (SPM) has been made and implemented in an Indian firm, which reduces approximately 5% scrap and rework cost in a duration of 3?months.

牲畜欄

歸功于

Friction Stir Additive Manufacturing—A Reviewface the drawback of solidification issues and are not applicable for every alloy. Friction stir additive manufacturing (FSAM) is a family of novel techniques that utilizes friction stir welding principle for layer-by-layer additive manufacturing of materials. This technology is revered to be a brea

Lament

Processibility Analysis of Rotationally Moldable Linear Low-Density Polyethylene/Glass Fiber Blends a base resin, but pure LLDPE is unable to offer the required mechanical property in some critical applications where strength is on a considerable level. Additives proved valuable in filling out this void. In this paper, an attempt is made to evaluate the optimum range of LLDPE/glass fiber from th

甜得發(fā)膩

Feasibility of Joining Aluminum to Nylon Using Friction Stir Welding (FSW)ced by friction rather than direct flame. In the coming future, the joining of aluminum and thermoplastic will make innovative manufacturing due to its lightweight and high strength-to-weight ratio. This experimental work comes up with the feasibility of joining dissimilar material through numerous

Archipelago

鬼魂

A Study on the Comparison Between Activated TIG Variants on Weld Bead Profile of P91 Steel. Part: 1(FB-TIG) process and Flux Zone TIG (FZ-TIG) process on modified 9Cr–1Mo (P91) Steel. Bead-on-plate welding samples were prepared using TiO. flux with FB-TIG and TiO. and ZnO flux combination was used in FZ-TIG process. For systematic comparison, bead-on-plate welding samples were also prepared for A

Affectation

Role of Surface Cracking and Recast Layer Deposition on Formation of Hardened Layer During EDM of Inaspects of recast layer formation are studied during EDM of ‘difficult-to-cut’ aerospace superalloy Inconel 825. Effects of peak discharge current on?the thickness of the?recast layer are studied in relation to different electrode materials used: Copper and copper–nickel (90% Cu and 10% Ni). Formati

背心

漂亮