Titlebook: Nanotechnology in Construction for Circular Economy; Proceedings of NICOM Wenhui Duan,Lihai Zhang,Surendra P. Shah Conference proceedings‘‘

Anticlimax

Nonlinear Wind-Induced Vibration Behaviors of Multi-tower Suspension Bridges Under Strong Wind Condnonlinear aerodynamic characteristics of the Maanshan Bridge under nonstationary flow using combination quasi-3D finite element (FE) bridge models of 2D nonlinear aerodynamic force models and 3D nonlinear FE bridge models. The developed model predictions were validated by wind tunnel tests involving

Moderate

Thermal Transfer Effects of CRTS II Slab Track Under Various Meteorological Conditions,ons becomes increasingly important, governed by a number of meteorological factors, including solar radiation, ambient temperature, wind speed and direction, humidity, and many others (Matias SR, Ferreira PA, Constr Build Mater 322:126445, 2022).

Anticoagulants

Investigation on Superhydrophobicity and Piezoresistivity of Self-sensing Cement-Based Sensors Usinr, we applied a surface treatment using a?silane/isopropanol solution to graphene/cement-based sensors to achieve superhydrophobicity and mitigate piezoresistive instability in watery environments. After treatment,?impressive?water contact angles of 163.4° and 142.0° were?achieved for the surface an

Laconic

foreign

,Composition of Alkali–Silica Reaction Products in Laboratory and Field Concrete,using two test methods: the accelerated mortar bar test (AMBT) and the simulated pore solution immersion test?(SPSM). The composition of the ASR products formed in the accelerated tests was compared with those in a 25-year old bridge in New South Wales demolished due to ASR. Results showed that the

物質

Behavior of Hybrid Engineered Cementitious Composites Containing Nanocellulose,ementitious composites (ECCs) has not been studied. In this paper, we investigated a hybrid polyethylene (PE)-steel fibre ECC reinforced with NC and the effect of NC dosages ranging from 0.1% to 0.4% on the compressive strength of the hybrid ECC. The optimum quantity of NC for the best mechanical pr

Gene408

Investigation of ASR Effects on the Load-Carrying Capacity of Reinforced Concrete Elements by Ultrasafety of ASR-damaged reinforced concrete structures have driven the demand for studying the effects of ASR on residual load capacity of the deteriorated structure. Conventionally, field load testing methods are used to assess the residual load capacity of ASR-affected structures. In this study, a n

linear

3D printed Ultra-High Performance Concrete: Preparation, Application, and Challenges,idering the particular characteristics of UHPC, the conversion of UHPC to 3DP-UHPC is a complex phenomenon and has been the subject of numerous studies. It is very important to be able to design a thixotropic structure in the early hydration stage for bridging the gap between the slow setting of UHP

ULCER

恭維

Reusing Alum Sludge as Cement Replacement to Develop Eco-Friendly Concrete Products,itical environmental and economic concern due to a significant increase in sludge amount and disposal cost. In this paper, the feasibility of reusing sludge as cement replacement is investigated, and the physical performance and microstructure modification of concrete products made with sludge is di