Titlebook: Energy Conserve in Industry — Combustion, Heat Recovery and Rankine Cycle Machines; Proceedings of the C H. Ehringer (Directorate-General f

HALO

Design of Waste Heat Boilers for the Recovery of Energy from Arc Furnace Waste Gases information tends to be conflicting. An analysis of test results from BSC arc furnaces has been used to provide a typical pattern of waste heat rejection. This data provided a waste heat rejection of 200 kWh/tonne for a 170 tonne furnace. The waste heat boiler application is discussed in relation t

jaunty

Energy Recovery from Cast Iron Melting Furnacesled at one of TEKSID (FIAT Group) foundries..The pilot plant operation aims to demonstrate the technical and economical possibility of an industrial plant that recovers and converts the latent and sensible heat of the cupola emissions into electric energy by a recovery system composed of thermal and

危險

Antimicrobial

Medium Temperature 100 KW ORC Engine for Total Energy Systemschievable with a standard steam turbine, while applying a substantial heat flow at an usable temperature..The following assumptions were made for the design point of the ORC engine:.The latter assumption is due to the requirement of utilizing the heat released at the condenser for space heating or o

蛙鳴聲

Optimisation of a Multi-Vane Expander as the Prime Mover in an Organic Rankine Cycleon with Denco Air Ltd., Hereford, regarding the performance of multivane expanders as prime movers in organic Rankine cycles. Intensive, fully-descriptive, computer-aided design studies have been completed and have led to the development of robust, low-cost expansion devices with unique characterist

愚蠢人

Confirmation of the advantages of a Thermodynamic Cycle Using Sulfur with the Help of an Experimentae of sulfur as a thermodynamic fluid for energy production between 750°C and 500°C. Based on spectral data, the overall efficiency of a binary cycle sulfur-water plant is attractive (~ 60%). The present contract concerns the experimental confirmation of the interest of such a cycle. In this report w

報復

Acetabulum

Juan Fernando Pío-León,Alfredo Ortega-Rubiolts indicate that the system may have characteristics similar to those of a gas buffered heat pipe..Results of a series of 1000-hour corrosion tests on some six candidate metals indicates that we cannot at this stage recommend any suitable metal for long periods of exposure to sulphur-iodine mixes a

Scintigraphy

Glenn E. Weisfeld,Robin L. Billingsction of jet impingement heat transfer characteristics, hot and cold gas flow characteristics, ceramic material (silicium carbide) properties. A thermo-mechanical study conducted with CERAVER (France) leads to the following optimal design for SiC made core (0.340 m long, 0.250 m wide, 0.080 m high):

OATH

https://doi.org/10.1007/978-94-009-1830-6of attaining specific areas of 125 m./m3 and heat transfer coefficients up to 70 W/m.°K. The data obtained from these tests serve as a basis for planning industrial devices and have been used to design a prototype (exchange area: 12.5 m.) which includes cleaning devices. The tests of this prototype