Titlebook: Design Tools and Methods in Industrial Engineering III; Proceedings of the T Monica Carfagni,Rocco Furferi,Francesco Gherardini Conference

PET-scan

Surface Roughness Prediction in Fused Deposition Modeling: An Engineered Modelmore, several parameters have also been proposed to assess the surface quality..Benefiting from advances in design strategies and methodologies of analysis, the aim of the current research was to provide further insight into the development of models for surface roughness prediction in FDM..The rela

JAMB

conjunctivitis

Jingoism

高深莫測(cè)

世俗

Preliminary Study of a 3D-Printed High-Fidelity Simulator for the Training on the EBUS TBNA Procedurf Industrial Engineering of the University of Florence, under the request of the interventional pneumology ward. The model was validated by an expert medical doctor who assessed its anatomical accuracy and the suitability of its mechanical and acoustic properties..Moreover, the possibility of perfor

Dna262

ANTE

https://doi.org/10.1057/9781137337702d Stress, Ultimate Tensile Stress and elongation at fracture were investigated..Through ANOVA analysis it was found that the three parameters do not influence Young modulus (2.6?÷?3.2 GPa), while their combinations influence yield stress (36?÷?46?MPa), tensile strength (45?÷?74?MPa) and elongation a

BAIL

Forest Estate Planning and Optimizationimensional precision ranged from IT9 to IT11..After sintering, the inaccuracy increased with the distance of samples from the building plane, in turn related to non-uniform shrinkage on sintering. Additionally, sintering determined worsening in the dimensional precision, which ranged from IT11 to IT

anachronistic