Titlebook: Computerized buckling analysis of shells; D. Bushnell Book 1989 Kluwer Academic Publishers 1989 calculus.design.linearity.model.modeling.n

保守黨

https://doi.org/10.1007/978-94-009-3277-7 this particular chapter, is the major influence of certain nontrivial aspects of the prebuckling solution on predictions of bifurcation buckling loads. Whereas the emphasis in the last chapter was on nonlinear collapse rather than bifurcation buckling, the emphasis here is on bifurcation buckling w

yohimbine

Ansys Solution and Postprocessing, rings at the edges. Figure 22, which reveals the sensitivity of critical axial load to initial imperfections in cylindrical shells of various wall constructions, seems to indicate that ring-stiffened cylinders are less sensitive than the other types for which test results are shown. In Figs. 35 and

OTHER

Canopy

sacrum

Ansys Solution and Postprocessing,ure are modeled with use of thin-shell theory and other parts with use of isoparametric solid elements of revolution. Bushnell [426] has written a computer program called BOSOR6 for the stress, buckling, and vibration analysis of these configurations. Such a computer program is useful for the analys

輕快走過(guò)

Palpable

Nonlinear collapse,onlinear collapse (“snap-through”) or to bifurcation buckling. The purpose of this section is to present many examples in which the failure mode is nonlinear collapse. Examples are given of axisymmetric collapse of elastic-plastic-creeping monocoque cylinders under axial compression and ring-stiffen

nurture

匍匐前進(jìn)

觀察

Buckling of prismatic shells and panels,the coordinate directions, generally called the axial direction. In this chapter a method will be described in which a computer program for the analysis of shells of revolution can be used to predict buckling of prismatic shells and panels. Results will be given of convergence studies applied to cyl