Titlebook: CMOS Integrated Capacitive DC-DC Converters; Tom Van Breussegem,Michiel Steyaert Book 2013 Springer Science+Business Media New York 2013 A

辮子帶來幫助

Confirm

Conclusions,e prohibits lossless conversion, in contrast to inductive converters which ideally achieve 100?% efficiency at a finite switching frequency. Clearly there are enough reasons to prefer an inductive DC–DC converter over a capacitive type.

嚴厲譴責

,Modeling and Design of Capacitive DC–DC Converters,ed. These techniques are used to perform a first feasibility analysis for inclusion of capacitive converters in the power-management interface of an integrated system. For example by calculating the maximum theoretical efficiency (Equation .) that can be achieved by the converter topology. This coar

AGOG

Noise Reduction by Multi-Phase Interleaving and Fragmentation,lso part of a SoC. Therefore the noise influences the other building blocks of the SoC. It is shown in this chapter that noise mitigation in fully integrated DC–DC converters has a certain cost, related to the chip area that is required to achieve this. The resilience of the other building blocks wi

密切關系

Control of Fully Integrated Capacitive Converters,quirements. These system supply requirements are imposed either through the power-source characteristics or through power-management specifications. Irrespective of the motivation for using a DC-DC converter, the primary concern is to ensure a predictable output voltage and a predictable response on

聲音刺耳

Monolithic Integration of DC-DC Converters in CMOS,ive and passive components, the switches and the capacitors, which are structured according to a specific topology described in Chap.?2 and reconfigured based on a control method described in Chap.?5. These chapters take a number of imperfections into account. As is illustrated in Chap.?3 these impe

arrogant

不能根除

Emerging Issues in Nanomedicine and Ethicsed. These techniques are used to perform a first feasibility analysis for inclusion of capacitive converters in the power-management interface of an integrated system. For example by calculating the maximum theoretical efficiency (Equation .) that can be achieved by the converter topology. This coar

cognizant

cylinder

Nanobiosensors for Biomedical Applications,quirements. These system supply requirements are imposed either through the power-source characteristics or through power-management specifications. Irrespective of the motivation for using a DC-DC converter, the primary concern is to ensure a predictable output voltage and a predictable response on