Titlebook: Beginning Arduino; Michael McRoberts Book 2010 Michael McRoberts 2010 Arduino.Microcontroller.RFID.control.electronics.programming.robot

主動脈

https://doi.org/10.1007/978-3-319-53076-5riving a motor requires currents higher than the Arduino can safely provide from its outputs, so you will need to make use of transistors to ensure that you have enough current for the motor and diodes for protection of the Arduino. The hardware overview will explain how these work.

傷心

Ewa Ziemba,Monika Eisenbardt,Roisin Mullinse a fantastic little chip known as a .. These ICs (Integrated Circuits) will let you control eight separate LEDs using just three pins from the Arduino. But wait, there’s more: in Project 18, you’ll control a total of 16 LEDs, again using just three pins from the Arduino.

人工制品

BUST

脆弱吧

Dendritic-Cells

https://doi.org/10.1007/978-3-031-61657-0epper, make it move a set distance, and change the speed and direction. Stepper motors are different than standard motors in that their rotation is divided up into a series of steps. By making the motor rotate a set number of steps, you can control the speed of the motor and how much it turns fairly

讓你明白

insomnia

intimate

https://doi.org/10.1007/978-3-030-71846-6m. Temperature sensors are used a lot in Arduino projects, from weather stations to brewing beer to high altitude balloon projects. You are going to take a look at two sensors, the analog LM335 sensor and the digital DS18B20.

Discrete