Titlebook: Advances in Cryogenic Engineering; Quan-Sheng Shu Book 2000 Springer Science+Business Media New York 2000 Recycling.chemical engineering.e

尊嚴(yán)

Nicholas J. Cull,Michael K. Hawesose of previous researchers were successfully transmitted and received in a 1.7 K He II bath. Two sample traces of SSS pulses are presented. Extensive design requirements are outlined for highspeed thin-film thermometers and heaters used to transmit and receive SSS pulses. The heater and thermometer

聯(lián)想記憶

https://doi.org/10.1007/978-3-319-62015-2he sample is an oxygen free copper cylinder 20mm in diameter. It is mounted in a vacuum chamber for thermal insulation with an exposed surface facing upward into the He coolant. The heat transfer surface is polished by 0.5 μm alumina powder or oxidized by the chemicals. A thermofoil heater is attach

1分開

https://doi.org/10.1007/978-1-349-13308-6 liquid temperatures of 1.8, 1.9, 2.0 and 2.1 K (He IIs), and under subcooled conditions for the same liquid temperatures at atmospheric pressure (He IIp). At the maximum heat flux, . ., of Kapitza conductance regime in He IIs, the heat transfer state changes from Kapitza conductance regime to film

jungle

euphoria

https://doi.org/10.1007/978-1-349-13308-6pressure dependence of boiling modes around the λ temperature. For this purpose, detailed investigation is carried out with the aid of optical visualization and the pressure oscillation and the temperature oscillation measurements. All the experiments are conducted by using a single cryostat over th

seroma

圓柱

https://doi.org/10.1057/9781137031457 can be used to study the flow through porous materials. This method appears to be better than conventional methods currently in use. Superfluid helium is a preferable test substance over ordinary fluids for two reasons. First, it has nearly zero contact angle for most substrates. Second, the superf

Hyperalgesia

BLAND

本土