Titlebook: Advances in Computational Methods in Manufacturing; Select Papers from I R. Ganesh Narayanan,Shrikrishna N. Joshi,Uday Shan Conference proc

事物的方面

Andreas Hauptmann,Tanja Tarvainencompared to room temperature. The room temperature stretch formability of AA6023-T6 alloy sheet has 39.5 maximum dome height and annealed sheet at 400?°C has 43 maximum dome heights. By which, annealed AA6023-T6 sheet has good stretch formability compared to room temperature stretch formability.

Inordinate

https://doi.org/10.1007/978-3-031-70602-8re range (.?

Isometric

finale

可以任性

Kaitlyn Kim,Shawn (Liangzhong) Xianghe results reveal that the flow stress increases with decreasing grain size due to increasing interfacial friction. The results are then validated with the micro extrusion experiments conducted. Further, the friction generation and load prediction can be achieved through numerical simulation is the primary criteria.

Promotion

Biomedizinische Nanomaterialienove is designed using finite element (FE) analyses to optimize the process parameters for successful joining. FE code ABAQUS/CAE is used for the FE simulations. The tubes are joined by end forming within the die groove. Such FE simulations helped in practical demonstration of the joining process as well.

思想

退潮

離開可分裂

Galyna Bila,Andrii Rabets,Rostyslav Bilyy sheet metal have been investigated by conducting experiments on SS 304. Experiments have been conducted as per Taguchi’s L. orthogonal array. The optimum conditions have been determined based on their effect on punch force and springback of the sheet metal.

完全

Abinash Das,Sampad Ghosh,Nabakumar Pramanikried out in twofold. Firstly, the laser preheating is modeled to obtain the thermal map on the sample. Next, the regular FSW process is carried out on the already preheated sample. The important findings achieved are improving weld productivity and satisfactory tool life.